AutoMatters & More: 1,000hp ‘Hellephant’ & ‘Super Charger’ Concept at SEMA Show 2018

I’ve just returned from a week in Las Vegas, most of which was spent covering the annual SEMA Show. This international show – one of the largest held in Las Vegas – is a trade-only event to enable “automotive specialty equipment manufacturers to display alongside automotive manufacturers to debut new, innovative products, and connect with industry buyers from all over the world.”

Included in exhibitors’ booths and throughout the convention center are approximately 1,500 feature vehicles. Immediately after the SEMA Show ends, and for several hours, many of these vehicles can be enjoyed from grandstands, as they leave the convention center in the annual “SEMA Cruise.” The cruise ends at “SEMA Ignited,” the official SEMA Show after-party that is open to SEMA Show attendees and the public alike.

Mopar Crate
“Hellephant” 1,000hp 426 Supercharged Mopar Crate HEMI engine Jan Wagner

It takes something really special to stand out in this crowded field. This year, a concept car based on the iconic 1968 Dodge Charger did just that.

This stunning, one-off concept celebrated its namesake’s 30th anniversary as the featured vehicle in the annual, standing room only press conference at the large FCA (Fiat Chrysler Automobiles) Mopar exhibit. While retaining a strong resemblance to the 1968 original, the Dodge “Super Charger” concept was thoroughly modernized with elements from the current Dodge Charger SRT and the Dodge Challenger SRT lineup, all to showcase the other elephant in the room: Mopar’s new “Hellephant” 426 Supercharged Mopar Crate HEMI engine.

The “Hellephant” delivers 1,000 pavement-pounding horsepower and 950 lb.-ft. of torque – the first-ever 1,000 horsepower crate engine assembly offered by an Original Equipment Manufacturer (OEM). In the “Super Charger,” that massive power is routed through a stock T-6060 manual, six-speed, Dodge Challenger SRT Hellcat transmission. The assembly includes a water pump, flywheel, front sump oil pan, supercharger with throttle body, fuel injectors and coil packs.

Super Charger
Rear corner view of “Super Charger” concept Jan Wagner

In addition to the engine that was in the car, another “Hellephant” was on display on the stage in a see-though crate, but it was not just there for us to see. They actually started it and revved it up, to the accompaniment of appreciative whoops and hollers from the audience.

The “Hellephant’s” block is all-aluminum, for light weight. It is used in Mopar Dodge Challenger Drag Pak race vehicles that dominated the 2018 NHRA Factory Stock Showdown class. It was configured for the street in close collaboration with Mopar and SRT engineers from the motorsports world. Mopar tells us that installation is almost turnkey with the “Hellephant” 426 Supercharged Mopar Crate HEMI Engine Kit.

Exhaust tailpipes
Straight exhaust tailpipes within the taillights Jan Wagner

The Super Charger’s exterior is finished in an understated “De Grigio” grey metallic paint. Fresh air is fed to the “Hellephant” through a supersized hood scoop modeled on that of the Dodge Challenger SRT Demon. A distinctive “Hellephant” logo is on the gas cap and elsewhere. Whereas the 1968 Charger had pop-up headlights, this concept’s Dodge Charger SRT Hellcat headlights shine from behind the grille. The original front door vent windows are replaced with one-piece side glass, with side mirrors from the 1971 Plymouth Duster.

Body colored fender flares on the significantly lowered car produce an aggressive “wide body” look. The front wheels are pushed forward, extending the wheelbase by two inches (to 119) and reducing the front overhang, which contributes to a longer, lower appearance. The rear wheels are custom-milled 21 x 12-inch aluminum Devil’s rims, to match the appearance of the stock 20 x 11-inch Devil’s wheels at the front, from the Challenger SRT Hellcat. Brakes are 6-piston Brembos.

Charger two
“Super Charger” parallel parked & unattended, with windows open, on the street Jan Wagner

Look closely to see that pairs of straight pipes emerge from within the rear taillights. An air gap between inner and outer pipes keeps them cool to the touch.

Inside, the custom 2-inch rollcage matches the side windows opening.

While the car is a concept, customers will be able to purchase its engine. The “Hellephant” will be available in the first quarter of 2019. For more information on this and other Mopar Crate HEMI engines, visit

At the end of the final day of the SEMA Show, as we left “SEMA Ignited,” I and other passers-by were both shocked and delighted when we saw the “Super Charger” parallel parked and with windows open, unattended, on the street next to the convention center. Soon however, someone arrived and drove it away. You can see video of that, plus additional photos at Enter “AutoMatters & More” in their search bar and click on TRIBES. Send comments and suggestions to

Copyright © 2018 by Jan Wagner – AutoMatters & More #564